Integra clutch installation

Remove transaxle mounting bolts from torque bracket. Remove starter and remaining transaxle mounting bolts. Separate transaxle from engine enough clear locating dowels. Carefully lower transaxle. Insert a clutch disc guide and diagonally loosen bolts to remove clutch assembly.

If reusing clutch, mark pressure plate and flywheel for installation reference. Installation 1. Align flywheel with dowel holes in clutch cover. Using clutch alignment tool and ring gear holder, install disc and pressure plate.

Tighten bolts in a crisscross pattern. Ensure 2 dowel pins are installed in clutch housing. Clean release bearing sliding surface and apply molybdenum grease to surface. Apply a light amount of grease to input shaft splines. Keep clutch disc and pressure plate surfaces free of grease and dirt.

To complete installation, reverse removal procedure. Refill all fluids to proper level. Adjust clutch pedal height and free play. Was this answer. Please login or register to post a reply. The Motor Is It Used To Asked by mr. Sponsored links. Ask a Car Question. It's Free! I just did a Toyota that all I needed to do was attach the ground out when running wire to one of the two wires at the clutch switch. You should be able to test the switch to determine the type with a simple test light.

JWorm Platinum - Posts: 2, Joined: December 11, Location: New Hampshire, United States. I followed them exactly and progress was made but not totally running yet You might be on the wrong one. The lower switch is for the cruise control. I've verified this -- I can see the pink wire from the lower switch leading to the cruise control brain. I had the correct clutch wires. The jumper wire worked.

But the relay doesn't. As an alternative "jumper" I also joined the two relay lead wires just taped together their connectors and that works. That's how I'm running now. But when the clutch wires relay lead wires are connected to the relay -- it doesn't work. So I guess Type Three isn't the right type of bypass to use?

I even tried another relay switch -- same results. Sorry, you can NOT post a reply. This topic is closed. Printable version. Search the12volt. Follow the12volt. Any user assumes the entire risk as to the accuracy and use of this information.